The number of projects where the BIM approach is required in design and construction is now constantly increasing in Slovenia, for now even more pronounced in the private sector than in the public sector. With this guide, everyone who prepares tender documents for contracting authorities will have an easier solution and a transparent tool for preparing BIM approach requirements, while providers of these services will know exactly what they need to produce and deliver to the contracting authority under the contract. This manual will serve all those involved in investments: clients, consultants, designers and contractors. Above all, it will serve all engineers and architects who will use the BIM approach and thus increase efficiency in the implementation of investments for clients.
This document is intended for clients of investments in the field of construction, which in the project task include the BIM approach. The functional and content requirements of the project are defined in the basic project assignments. This document (Requirements of the contracting authority for the development of the BIM model) is an annex to the basics of the project task and thus an integral part of the tender documentation. The recommendations set out in document, should be adapted to the specific requirements of the project and serve only to assist in planning the implementation of the BIM approach in the project. The document summarizes the contents of various national guidelines, which are adapted on the basis of experience from pilot BIM projects implemented in Slovenia.
https://www.izs.si/assets/media/izsnovo/2019/IZS_prirocnik_MSG_BIM_pristopa_za_gradnje_www.pdf
An archive version of this information article has been created if the original is no longer accessible (Archive information from January 2024)
The Building Act (GZ-1) was published and adopted by the National Assembly of he Republic of Slovenia in December 2021. This law governs the conditions for the construction of buildings and other issues relating to the construction of buildings.
The purpose of this Law is to protect the public interest in the construction of buildings. The public interest referred to shall include, in particular, the safety of buildings, respect for the principle of equal opportunities, protection of the environment, nature conservation, protection of waters, protection of cultural heritage, promotion of sustainable construction, coherence of the placement of buildings in the space, architecture as an expression of culture, recording, usefulness, efficiency, quality of the buildings and their consistency with the environment throughout their life cycle. The act mentions that, project documentation for the facilities referred to in this Law are to be produced by means of information-based design (BIM).
https://www.uradni-list.si/1/objava.jsp?sop=2021-01-3972
An archive version of this information article has been created if the original is no longer accessible (Archive information from January 2024)
Technical standards for BIM mostly describe the writing of certain data and information, and are not intended for general users, but rather for authors of software tools and a group of experts in the field. An exception however, is the CSN EN ISO 19650 standards, which describe processes and data handling. The standard serves as a guide for refining procedures so that the data generated meets the expectations of those who needed it. This Application Guide for ISO 19650 has been written and published by the Czech National Standards body CSN.
The set of technical standards CSN EN ISO 19650 is intended for all persons and organizations involved in the whole life cycle of the construction .Historically, it is customary that Czech technical standards are written directly as a guide. In this case, it is necessary to consider that the standards taken over from international participants are not specific guidelines, but principles and rules. Specific implementation and use, setting up your own processes, documents and the forms are up to the user or are subject to further specification at national level. This guide will explain the aspects of how ISO19650 should be applied to projects.
The obligation to use BIM when awarding public contracts for construction projects has not yet been made binding on the contracting authorities by legislation. The BIM Concept implies that from the so-called decisive date (originally 1 January 2022), contracting authorities awarding contracts will have above-limit public works contracts, including contracts for related pre-design and design services the obligation to award such a public contract using the BIM
The methodology in this document focuses mainly on defining the basic procurement processes so that they can be applied to BIM, considering effective cooperation within information models. Thanks to the methodological activities of the ?AS agency, the contracting authority will have a sufficient range of standards at its disposal, and cooperation processes within BIM will thus be built on a unified and standardsied basis .
It is obvious that if contracting authorities want to cooperate regularly and steadily with quality suppliers and enable them to deliver quality, they need to change their approach. When evaluating tenders we need to reduce the pressure on the bid price and give room for quality. In the Czech environment, no universal bid evaluation model has yet been reliably enforced. There are also no bid evaluation standards for specific industries of intellectually demanding services (typically eg IT consulting, software development and delivery). This situation is long-term and has its objective reasons, consisting mainly in the current very strict view of review bodies (whether by the Office, courts or grant providers) on qualitative evaluation, as well as a total lack of methodological support to develop good practice.
In the spirit of other methodological activities of the ?AS agency, this document also builds on the already existing methodological documents. This document explains the methodology of public procurement using BIM, in connection with the evaluation of bids, especially for the evaluation of bids according to a ranking system for construction works and services, which was developed for the State Fund for Transport Infrastructure (SFDI).
Public institution “Skaitmenine statyba” (“Digital Construction“) is an organization that joins associations of Lithuanian construction sector and coordinates the digitalization process of Lithuanian construction.
Prepared by the Ministry of Environment of the Republic of Lithuania, and approved by the Goverment of the Republic of Lithuania.
This document was published on the 20th May 2020 and is the decision of the Government on the mandatory application of BIM methods.
An archive version of this information article has been created if the original is no longer accessible (Archive information from January 2024)
Prepared by the Ministry of Environment of the Republic of Lithuania, and approved by the Goverment of the Republic of Lithuania.
This document was published on the 12th August 2020 and is the decision of the Government on the approval of the establishment of Lithuanian national construction information classification system (NSIK).
Lithuanian national construction information classification system (also known as NSIK – in Lithuanian Nacionalinis Statybos Informacijos Klasifikatorius) is one of the essential measures to ensure general application of Building Information Modelling (BIM) methods based on collaboration. Lithuanian national construction information classification system is being planned for 2023 and will be prepared by implementing BIM-LT project.
An archive version of this information article has been created if the original is no longer accessible (Archive information from January 2024)
This order implements the Amendment to the Resolution on the implementation of the Law on Public Procurement of the Republic of Lithuania and Law on Procurement in the Field of Water Management, Energy, Transport or Postal Services of the Republic of Lithuania.Â
The client (employer) will define his requirements for the project information in Employer Information Requirements (EIR) document. The supplier (designer or contractor) will fill in the form of BIM project implementation plan.
The link to the legal act (order) in the Register of Legal Acts:Â
https://www.e-tar.lt/portal/lt/legalAct/df1cf1c0956e11ecaf3aba0cb308998c Â
Please see link to information
