Following common international standards in information management would significantly improve the profitability of the real estate and construction sector. It could also increase cooperation among the different organisations. Through the RASTI project launched under the ‘KIRA-digi’ process the Ministry of the Environment is now building a strategy for the use of international standards. The aim of the RASTI project is to improve the efficiency of information management in Finland’s built environment by up to 50%. In the long term this would mean annual cost savings of about EUR 300 million. At the moment there are several international and local, partly overlapping standards relating to information management, and it is a challenge for operators in the real estate and construction sector to choose the most suitable ones.
The RASTI project is implemented by a group of experts from a consortium of companies brought together by the buildingSMART Finland Forum. In the project a proposal will be prepared concerning the harmonised use of international information management standards in the real estate and construction sector, followed by a strategy on how the target state is to be reached by 2030. At the same time, the project will also help operators in the sector to understand better the importance of joint information management and to commit to implementing the strategy. This website contains all of the news, blogs, links and downloads related to the progress of the RASTI project.
This framework was published under the ‘Support Skills Development and Develop Appropriate Tools’ workstream of the Digital Building Transition Plan (PTNB). It allows trainers to develop BIM courses that are suited to the real needs of contractors and construction companies.
The stages in the life of a building have been broken down into about 20 activities that may involve members of the project management or companies. Each activity is associated with the skills specific to the stage of the project and to the project management or construction professionals. Skills are 4 to 14 per activity, to which must be added transversal skills for all the activities. These skills are broken down into knowledge and know-how. They are described and presented according to the recommendations of the National Commission for Professional Certification (CNCP).
This freely accessible document was published under the ‘Building Trust in Digital’ workstream of the Digital Building Transition Plan (PTNB). It was developed by digital construction specialists and uses an automated form to support the preparation of BIM agreements.
Published in Word or Excel, it covers all the sections to be developed in a BIM agreement and offers a questionnaire to help draft the sections, so they are appropriate to the project. Processes common to all BIM projects are also included. To create a bespoke agreement, the BIM management team only has to complete the fields indicated with the characteristics of their project.
This document was developed within action 3 of the BIM 2022 plan ‘Requirements and Standardisation’. It is an easy-to-access brochure that promotes the normative work in progress.
Its purpose is to inform anyone involved in the construction sector on the work carried out in the various national (AFNOR) and international (CEN – ISO) standardisation bodies.
The document outlines the purpose and need for standards, and describes the standardisation landscape and its ecosystem. It also provides information on the available national and international BIM standards.
This free platform is aimed at all project owners, regardless of their structure, their level of BIM maturity or the type of their operations. It was produced by industry partners on behalf of the BIM Plan 2022 and the Housing, Urban Planning and Landscape Department (DHUP).
Through the support offered on ORELIE, project owners can integrate all of the theoretical notions related to BIM specifications. Support is structured on the basis of the framework of a standard BIM Specification, which has previously been defined as part of action 1 of the BIM Plan 2022: Making the BIM order reliable.
Thanks to videos, documents and interactive presentations, each user can therefore complete their BIM specifications, part by part, writing and updating their document in complete autonomy.
The platform aims to complete BIM repositories and pre-existing guides by offering an interactive tool, promoting user engagement and offering a space for reflection.
This document was published under the ‘Building Trust in Digital’ workstream of the Digital Building Transition Plan (PTNB). The Inter-ministerial Mission for the Quality of Public Constructions (MIQCP) was tasked with publishing a guide for contracting authorities with the aim of developing a set of very practical recommendations based on experiences and expert opinions.
Convincing project owners of the benefits of BIM is essential. This comprehensive 54-page guide describes in detail how to get started with BIM and conduct an operation digitally with other construction stakeholders. It specifies the roles and responsibilities of all those involved with regard to the use of the digital model and describes the actions to be carried out by the contracting authority.
Poznan University of Technology is a technical university conducting research and training in BSc, MSc, PhD engineering and postgraduate studies in 20 different fields, including Architecture and Urban Planning, Construction and Environmental Engineering. The university specialises in improvements throughout the construction lifecycle, including; preparation for the design, construction, asset management, renovation, reinforcement and demolition of buildings and civil engineering structures, all areas where the BIM technology is applicable.
The university has created this BIM website to act as a home and sharing platform for current research and discussion around BIM in Poland. It has a remit to provide research activities around BIM, understand the industries’ needs and try to address them. The website contains a few videos and useful links, but the bulk of the content is meeting minutes, outputs, reports and recordings of events that have been held either virtually or in person over the past decade.
The Public Procurement Office (Urzad ZamówieÅ„ Publicznych – UZP), headed by the President, is the central body of government administration. Supervision over the President of the Office is exercised by the Minister for the Economy. The advisory and opinion-giving body of the President is the Public Procurement Council, whose members are appointed and dismissed by the Minister for the Economy.
This website outlines useful information and knowledge sharing for BIM in four main sections:
- Regulations, including both national Polish law, as well as EU law related to BIM
- BIM Standard EN, looking at the international standards for BIM (ISO 19650) and the BIM Standard PL
- Links to other ministries / groups
- Publications, including links to documents from the EU BIM Task Group.
The Polish Association of Construction Employers (Polski ZwiÄ…zek Pracodawców Budownictwa – PZPB) is a nationwide organisation grouping companies from the infrastructure and construction industry, which together generate over PLN 50 billion of the value of construction and assembly production in Poland and employ over 50,000 people. Among the PZPB member companies there are 13 of the 15 largest enterprises dealing with comprehensive investment implementation, development companies, specialised design companies, companies producing construction products, machines, providing technologies and others related to the infrastructure and construction sector.
This study presents the results of several years of social work on Polish BIM standards intended for public investments in construction, tentatively named BIM Standard PL. The project began in 2014, when an agreement was signed between the Polish Association of Construction Engineers and Technicians (PZITB), the Association of Polish Architects (SARP) and the Chief Construction Supervision Office (GUNB) regarding cooperation in legislative processes related to construction, with one of the topics being BIM.
As a result of this agreement, under the aegis of PZITB and SARP, a think tank called V4 BIM Task Group was established, which gathered a group of the experts in the field of BIM to formulate the Polish path to BIM implementation. Three main goals were identified: implementation of BIM in public investments in construction, staff education and standardisation of BIM processes. The year 2025 was indicated as the deadline.
BIM Standard PL started in 2018 with the signature of a declaration of cooperation between PZITB, the Polish Association of Construction Employers (PZPB), SARP and Budimex, Skanska, Warbud and Porr to develop a draft of BIM standards for public investments in construction. It is intended as a comprehensive BIM manual for investment, management and construction professionals mainly in the public sector. BIM Standard PL is addressed both to the ordering party and contractors, with particular emphasis on good preparation of the BIM information process and correct implementation. Due to the different level of BIM competences among potential users, BIM Standard PL is not only defining the standards but also offers educational materials to acquire BIM competences. This document is not an official standard but a proposal, made available for market evaluation and discussion.
The Ministry of Development & technology for Poland has appointed a BIM working group and steering committee. The group and committee developed BIM templates to support the implementation of digital ways of working in public projects in residential construction. These are universal document templates to be used in public and private construction projects.
This set of 12 BIM templates were created by involving all stakeholders (designers, engineers, general contractors, ministries, etc.), which had the opportunity to submit comments and proposals for solutions to be used in these documents.
The BIM set includes:
- BIM Lexicon
- BIM Requirements Template (EIR) Overview
- BIM Requirements Template (EIR)
- BIM Plan (BEP) template overview
- BIM Plan Template (BEP)
- Table of production and supply of models (Template, overview, example)
- BIM annex to the contract.
These BIM templates should be used as a proposal for the layout of documents and their minimum content, which will allow for the proper implementation of BIM to meet all the project and organisational requirements. These templates can be adapted to suit a project.